The first sealant for insulating glass - Jinghuali butyl rubber is a single component flux free sealing material made from imported butyl rubber and polyisobutene. This product has good bonding and sealing performance for aluminum profiles, stainless steel, and glass, and is suitable for the first sealing of insulating glass. This product is used for the first sealing of insulating glass and can be matched and used with two-component polysulfide adhesive, two-component silicone elastic sealant, two-component polyurethane sealant, and single component hot melt adhesive. It is completely double sealed. The double sealed insulating glass made with this product has been tested and qualified by the National Glass Testing Center and meets various requirements of the national standard. When in use, clean and dry all the surfaces of the glass and aluminum strips that need to be bonded to remove dust and oil stains. Use a special hot melt butyl extruder to apply evenly, and extrude at around 125-135 degrees Celsius. The construction environment should not be lower than 5 degrees Celsius.
Butyl rubber used for insulating glass has good resistance to cracking, hardness, and temperature, and has a good barrier effect on the transmission of water vapor.
It can be combined with various two layer sealants to achieve dual layer sealing, including two-component polysulfide sealant, two-component silicone elastic sealant, two-component polyurethane sealant, and single component hot melt adhesive.
Black or gray
在零下40oC至正130oC范圍內(nèi)連續(xù)使用30小時，不產(chǎn)生粉塵、不硬化、不喪失粘附性且不分解，最高耐受溫度為175oC
1.15—1.25g/cm3
≥0.10MPa
≥0.80MPa
168 hours, no fogging phenomenon
Each paper drum contains 7kg, with a diameter of 180mm or 190mm, a height of 220mm, and a box of 28kg
A special formula for ultra sealed insulating glass thermoplastic warm edge spacer adhesive, using a manufacturing process of direct extrusion molding with a special mixture of butyl rubber and molecular sieve, as the first sealing material for insulating
This type of sealant belongs to the structural hot melt butene sealant. Our company uses dozens of additives such as imported sealing collagen materials, butene rubber, resin, etc., designed specifically for the hollow glass industry. It has super strong
The RDJ-B series hot melt adhesive gluing machine belongs to the economical and applicable type, with advantages such as small and lightweight, low electricity consumption, easy operation, and small space occupation. Suitable for small production enterpri
